Connect to a Bluetooth Device via the Terminal
Here we describe how to connect to a Bluetooth device via the terminal. This process involves configuring our Bluetooth controller, pairing it to our target device, and then finally connecting.
Using the bluetoothctl Command
To interact with bluetoothd from the terminal, we use the bluetoothctl command.
$ bluetoothctl
Agent registered
[bluetooth]#
Using bluetoothctl by itself will open the interactive shell. This is called interactive mode and is where we can run commands to configure our Bluetooth settings.
To get more information about using interactive mode, let’s run the help command in the interactive shell:
[bluetooth]# help
Menu main:
Available commands:
-------------------
advertise Advertise Options Submenu
monitor Advertisement Monitor Options Submenu
...
Sometimes, however, we want to run a command outside of the interactive shell. Luckily, there’s also a non-interactive mode in bluetoothctl, which we can use by running an individual command:
$ bluetoothctl --help
bluetoothctl ver 5.64
Usage:
bluetoothctl [--options] [commands]
Options:
--agent Register agent handler:
...
Preparing Our Bluetooth Controller
Now that we know the basics of using bluetoothctl, let’s begin preparing our Bluetooth controller.
Configuring a Bluetooth Controller
Let’s begin to configure our Bluetooth controller by using the show command:
$ bluetoothctl show 00:1A:7D:DA:71:15
Controller 00:1A:7D:DA:71:15 (public)
Name: pc-m
Alias: pc-m
Class: 0x00000000
Powered: no
Discoverable: no
DiscoverableTimeout: 0x00000000
Pairable: no
...
Discovering: no
...
Typically, the bluetoothctl show command will output a large amount of information. However, we just need to ensure our controller is powered-on, discoverable, and pairable.
Let’s start by powering on our controller:
$ bluetoothctl power on
[CHG] Controller 00:1A:7D:DA:71:15 Class: 0x006c0104
Changing power on succeeded
We can use the bluetoothctl power on command to power on our controller. It’s important to power on our Bluetooth controller before modifying other controller attributes.
Next, we should set the controller to be discoverable and pairable:
$ bluetoothctl discoverable on
Changing discoverable on succeeded
$ bluetoothctl pairable on
Changing pairable on succeeded
We set the controller to discoverable using the command bluetoothctl discoverable on, and then we use the bluetoothctl pairable on command to set our controller to pairable. The output of these commands shows that they were successful.
Using Multiple Bluetooth Controllers
When using multiple Bluetooth controllers, we must ensure we select the correct one before configuring.
Let’s use the bluetoothctl list command to get a list of connected Bluetooth controllers:
$ bluetoothctl list
Controller 00:1A:7D:DA:71:15 pc-m [default]
Controller 34:02:86:03:7C:F2 pc-m #2
This command outputs information about the connected Bluetooth controllers, including their MAC addresses and what the default controller is. The default controller is the controller that will be operated on when we run a command.
To change the default controller, we use the bluetoothctl select command, passing the MAC address of the controller we want to connect to:
[bluetooth]# select 34:02:86:03:7C:F2
Controller 34:02:86:03:7C:F2 pc-m [default]
[bluetooth]# list
Controller 00:1A:7D:DA:71:15 pc-m
Controller 34:02:86:03:7C:F2 pc-m #2 [default]
In this example, we used the select command in interactive mode. Non-interactive mode opens up a new session per command, but the interactive shell maintains the same session until exited. Since the select command only changes the default controller for the current session, it will only work within interactive mode.
However, there is a way we can use select in a similar way to non-interactive mode:
$ bluetoothctl <<< $'select 34:02:86:03:7C:F2\nlist\n'
...
[bluetooth]# select 34:02:86:03:7C:F2
Controller 34:02:86:03:7C:F2 pc-m [default]
[bluetooth]# list
Controller 00:1A:7D:DA:71:15 pc-m
Controller 34:02:86:03:7C:F2 pc-m #2 [default]
In this example, we use a here-string to redirect our string to stdin. This causes the bluetoothctl shell to treat the string as user input and allows us to automate the process of using interactive mode. Our string can contain as many commands as want as long as we end each with a newline.
Connect a Bluetooth Device Using the Terminal
After configuring our Bluetooth controller, we can begin pairing and connecting our device.
Pairing a Bluetooth Device
Now, we can begin to pair our Bluetooth device to our controller. To start, we should turn our controller to discovery mode:
$ bluetoothctl scan on
Discovery started
[CHG] Controller 00:1A:7D:DA:71:15 Discovering: yes
^Z
[1]+ Stopped bluetoothctl scan on
To set the controller to discovery mode, we use the bluetoothctl scan on command. However, this command is a foreground job, which means that we won’t be able to use the terminal until it is finished. So, we put it in the background using Ctrl-Z.
Now, let’s output the discovered devices using bluetoothctl devices:
$ bluetoothctl devices
Device 3C:4D:BE:84:1F:BC MyEarbuds
Device 60:B7:6E:35:39:0D MyPhone
Once we know the MAC address of our device, we can begin pairing. Let’s use the bluetoothctl pair command to pair to our device with the name “MyEarbuds”:
$ bluetoothctl pair 3C:4D:BE:84:1F:BC
Attempting to pair with 3C:4D:BE:84:1F:BC
[CHG] Device 3C:4D:BE:84:1F:BC Connected: yes
...
[CHG] Device 3C:4D:BE:84:1F:BC Paired: yes
Pairing successful
bluetoothctl pair command. The output will tell us if our device paired successfully or not.
Now that our device is paired, we don’t need to be in discovery mode anymore. To exit discovery mode, we must end the bluetoothctl scan command that we put into the background:
$ fg
bluetoothctl scan on
^C
To stop a background job, we use the fg command to bring the bluetoothctl scan into the foreground. Then we press Ctrl-C to stop the program.
Connecting a Bluetooth Device
Let’s start connecting to our Bluetooth device using bluetoothctl connect:
$ bluetoothctl connect 3C:4D:BE:84:1F:BC
Attempting to connect to 3C:4D:BE:84:1F:BC
...
Connection successful
We can connect a paired Bluetooth device by using its MAC address with the bluetoothctl connect command. The output will show whether we successfully connected to our device or not.
Disconnecting a Bluetooth Device
Likewise, we can disconnect our device using the bluetoothctl disconnect command, again passing the MAC address of the device we want to disconnect:
$ bluetoothctl disconnect 3C:4D:BE:84:1F:BC
Attempting to disconnect from 3C:4D:BE:84:1F:BC
...
Successful disconnected